Skip to main content
Please use this identifier to cite or link to this item:

Issue Date: 1-Apr-2019
Title: Influence of forced convection on sessile droplet evaporation
Authors: Fung, Henry
Publisher : University of Ontario Institute of Technology
Degree : Master of Applied Science (MASc)
Department : Mechanical Engineering
Supervisor : MacDonald, Brendan
Keywords: Sessile droplet
Forced convection
Abstract: Evaporation is a phase change process with potential for achieving large heat transfer rates under high air temperatures due to the latent heat of vaporization. Bioin-spired artificial perspiration systems can leverage the evaporation of sessile droplets to implement this effect for different cooling applications. In the case of human perspiration, droplet evaporation typically occurs under exposure to moving air, or forced convection. However, current approaches to understanding droplet evaporation primarily use a vapour-diffusion limited model. Experiments using an open-loop wind tunnel and computer-vision based control system were conducted to measure evaporation rates of continuously-fed sessile droplets under forced convection. Results demonstrated increases to the evaporation rate with the inclusion of forced convection and removal of the vapour-diffusion limit, but also shows evidence for a limit based on thermal behavior. Additional experiments also demonstrate boundary layer effects caused by adjacent droplets suppresses increases to the evaporation rates from forced convection.
Appears in Collections:Electronic Theses and Dissertations (Public)
Faculty of Engineering and Applied Science - Master Theses

Files in This Item:

File Description SizeFormat
Fung_Henry.pdf15.81 MBAdobe PDFView/Open

Items in e-scholar@UOIT are protected by copyright, with all rights reserved, unless otherwise indicated.